Patient leaflet - Polivy 30 mg powder for concentrate for solution for infusion
1. What Polivy is and what it is used for
What Polivy is
Polivy is a cancer medicine that contains the active substance "polatuzumab vedotin".
It is always used together with other cancer medicines – see below “What other medicines is Polivy given with”.
What Polivy is used for
Polivy is given to treat “diffuse large B-cell lymphoma” that has never been treated before.
Polivy is also given to treat “diffuse large B-cell lymphoma” that has come back or has not got better:
- after at least one previous therapy, and
- when you cannot receive a stem cell transplant.
“Diffuse large B-cell lymphoma” is a cancer that comes from “B lymphocytes” also called B-cells. These are a type of blood cells.
How Polivy works
Polivy contains something called a ‘monoclonal antibody’ and a substance that can kill cancer called ‘MMAE’. ● The “monoclonal antibody” part of the medicine attaches to
a target on B cells.
Once attached to B cells, the medicine releases “MMAE”
into the B cells and kills them.
What other medicines Polivy is given with
Polivy is given in combination with other cancer medicines: ● rituximab, cyclophosphamide, doxorubicin and prednisone
for “diffuse large B-cell lymphoma” that has never been treated before.
rituximab and bendamustine for “diffuse large B-cell
lymphoma” that has come back or has not got better, after at least one previous therapy – and when you cannot receive a stem cell transplant.
2. What you need to know before you are given Polivy
You must not be given Polivy
if you are allergic to polatuzumab vedotin or any of the
other ingredients of this medicine (listed in section 6). ● if you currently have an active severe infection.
If the above applies to you, you must not be given Polivy. If you are not sure, talk to your doctor or nurse before you are given Polivy.
Warnings and precautions
Talk to your doctor or nurse before you are given Polivy if any of the following apply to you (or you are not sure):
you have ever had brain or nerve problems such as:
- memory problems
difficulty moving or sensations in your body such as
feeling pins and needles, burning, pain and discomfort even from slight touch
- eyesight problems
- you have ever had liver problems
you think you have an infection or have had long-lasting or
repeated infections such as herpes (see “Infections” in section 4)
you are due to have a vaccine or you know you may need
to have one in the near future
If any of the above apply to you (or you are not sure) talk to your doctor or nurse before you are given Polivy.
Pay attention to the following side effects
Polivy can cause some serious side effects that you need to tell your doctor or nurse about straight away. These include:
Myelosuppression
Myelosuppression is a condition in which the production of blood cells is decreased, resulting in fewer red blood cells, white blood cells, and platelets. Your doctor will do blood tests to check your blood cell count.
Tell your doctor or nurse straight away if you:
- develop chills or shivering
- have a fever
- have headaches
- feel tired
- feel dizzy
- look pale
have unusual bleeding, bruising under the skin, bleeding
longer than usual after your blood has been drawn, or bleeding from your gums.
Peripheral neuropathy
Tell your doctor or nurse straight away if you have any problems with a change in the sensitivity of your skin, especially in your hands or feet, such as:
- numbness
- tingling
- a burning sensation
- pain
- discomfort or weakness
- difficulty walking.
If you had any of these symptoms before treatment with Polivy, tell your doctor straight away if you notice any changes in them.
If you have symptoms of peripheral neuropathy, your doctor may lower your dose.
Infections
Signs and symptoms of infections vary between individuals, tell your doctor or nurse straight away if you develop symptoms of an infection such as:
- fever
- cough
- chest pain
- tiredness
- painful rash
- sore throat
- burning pain when passing urine
- feeling weak or generally unwell.
Progressive multifocal leukoencephalopathy (PML)
PML is a very rare and life threatening infection in the brain, that has occured in one patient treated with Polivy together with bendamustine and another medicine called obinutuzumab.
Tell your doctor or nurse straight away if you have:
- memory loss
- trouble speaking
- difficulty walking
- problems with your eyesight.
If you had any of these symptoms before treatment with Polivy, tell your doctor straight away if you notice any changes in them. You may need medical treatment.
Tumour lysis syndrome
Some people may develop unusual levels of some substances (such as potassium and uric acid) in the blood caused by the fast breakdown of cancer cells during treatment. This is called “tumour lysis syndrome”. Your doctor, pharmacist or nurse will do blood tests to check for the condition.
Infusion-related reactions
Infusion-related reactions, allergic or anaphylactic (more severe allergic) reactions can happen. Your doctor or nurse will check for side effects during your infusion and for 30 to 90 minutes afterwards. If you get any serious reaction, your doctor may stop treatment with Polivy.
Liver damage
This medicine can cause inflammation or damage to cells in the liver that affect the normal function of the liver. Injured liver cells may leak high amounts of certain substances (liver enzymes and bilirubin) into the bloodstream, which can be detected by blood tests.
In most cases you will not have any symptoms but tell your doctor or nurse straight away if you get:
- yellowing of your skin and of the whites of your eyes (jaundice).
Your doctor will check your blood to test your liver function before and regularly during treatment.
Skin and tissue damage due to extravasation
Extravasation means that Polivy has leaked out of your vein into the tissues around the infusion site. Tell your doctor or nurse immediately if you feel a burning sensation, pain or tenderness at or surrounding the infusion site during the infusion. If Polivy has leaked outside the blood vessel, skin redness, pain, discolouration, swelling, blistering, peeling, or infection of deeper layers of your skin (cellulitis) at or surrounding the infusion site can occur within hours or weeks after the infusion.
Children and adolescents
This medicine should not be used in children or young people under the age of 18. This is because there is no information about its use in this age group.
Other medicines and Polivy
Other medicines and vaccines
Tell your doctor or nurse if you are taking, have recently taken or might start taking any other medicines. This includes medicines obtained without a prescription and herbal medicines.
Also tell your doctor or nurse if you are due to have a vaccine or you know you may need to have one in the near future.
Contraception (women and men)
If you are a woman of childbearing age, you must use effective contraception during treatment – and for 9 months after the last dose of Polivy.
Men must use contraception during treatment – and for 6 months after the last dose of Polivy.
Pregnancy
It is important to tell your doctor before and during treatment if you are pregnant, think you may be pregnant, or are planning to get pregnant. This is because Polivy can affect your baby’s health. Do not use this medicine if you are pregnant unless you and your doctor decide that the benefit to you outweighs possible risk to the unborn baby.
Breast-feeding
Do not breast-feed while receiving Polivy – and for at least 3 months after the last dose, because small amount of Polivy may pass into your breast milk.
Fertility
Men are advised to have sperm samples preserved and stored before treatment with this medicine.
Driving and using machines
Polivy has a minor influence on your ability to drive, cycle or use any tools or machines.
If you get infusion-related reactions or nerve damage, or if
you feel tired, weak or dizzy (see section 4) do not drive, cycle or use tools or machines until the reaction stops.
See section 4 for more information about side effects.
Polivy contains sodium
This medicine contains less than 1 mmol sodium (23 mg) per dose, that is to say essentially ‘sodium-free’.
Polivy contains polysorbate
Polivy 30 mg contains 1.8 mg of polysorbate 20 in each vial. Polivy 140 mg contains 8.4 mg of polysorbate 20 in each vial, equivalent to 1.2 mg/ml. Polysorbate may cause allergic reactions. Tell your doctor if you have any known allergies.
3. How Polivy is given
Polivy is given under the supervision of a doctor experienced in giving such treatments.
It is given into a vein, as a drip over 90 minutes.
How much Polivy is given
The dose of this medicine depends on your body weight.
The usual starting dose is 1.8 mg for each kilogram of your
body weight.
If you have peripheral neuropathy, your doctor may lower
your dose.
How often is Polivy given?
- Each cycle lasts 21 days.
You will be given 6 treatment cycles of Polivy in combination
with other medicines.
What other medicines is Polivy given with?
rituximab, cyclophosphamide, doxorubicin and prednisone
for “diffuse large B-cell lymphoma” that has never been treated before or,
rituximab and bendamustine for “diffuse large B-cell
lymphoma” that has come back or has not got better, after at least one previous therapy – and when you cannot receive a stem cell transplant.
If you miss a dose of Polivy
- If you miss an appointment, make another one straight away.
For the treatment to be fully effective, it is very important
not to miss a dose.
If you stop receiving Polivy
Do not stop treatment with Polivy unless you have discussed this with your doctor. This is because stopping treatment may make your condition worse.
If you have any further questions on the use of this medicine, ask your doctor or nurse.
4. Possible side effects
Like all medicines, this medicine can cause side effects, although not everybody gets them. The following side effects have been reported with this medicine:
Serious side effects
Tell your doctor or nurse straight away if you notice any of the following serious side effects – you may need urgent medical treatment. These may be new symptoms or a change in your current symptoms.
infusion-related reactions – your doctor will check for these
for 30-90 minutes afterwards
- fevers and chills
- rash/hives
- severe infections
- pneumonia (lung infection)
- herpes infection
- viral infections
- upper respiratory tract infection
- skin infection
- urinary tract infection
- unusual bleeding or bruising under the skin
memory loss, trouble speaking, difficulty walking or problems
with your eyesight
- yellowing of skin or whites of your eyes
- breathlessness and difficulty in breathing
leaking of Polivy out of the vein into surrounding tissues
(also called extravasation, see section 2. Skin and tissue damage due to extravasation) (frequency uncommon).
Other side effects
Tell your doctor or nurse if you notice any of the following side effects:
Very common: may affect more than 1 in 10 people
- pneumonia (lung infection)
runny nose, sneezing, sore throat and cough
(upper respiratory tract infection)
numbness, tingling, a burning sensation, pain, discomfort or
weakness and/or difficulty walking (peripheral neuropathy)
- fever
- cough
- vomiting
- diarrhoea or constipation
- soreness or inflammation of the mouth and/or gut (mucositis)
- feeling sick (nausea)
- abdominal (belly) pain
- feeling tired
- not feeling hungry
- loss of weight
- infusion-related reactions
- common cold
- hair loss
changes in blood tests:
- low levels of all types of white blood cell (combined)
low levels of neutrophils (a type of white blood cell) with
or without fever
low level of platelets (a type of blood cell that helps your
blood to clot)
- low levels of red blood cells (anaemia)
- low level of potassium in the blood (hypokalaemia)
Common: may affect up to 1 in 10 people
- severe infection (sepsis)
- urinary tract infection
- viral infections
- herpes infection
- skin infections
- inflammation of the lungs
- breathlessness and difficulty in breathing
- dizziness
fluid retention causing swelling in the lower legs or hands
(oedema peripheral)
- high level of transaminases in the blood
- joint pain
- itchiness
- chills
- rash
- dry skin
- muscle pain
changes shown in blood tests:
- decreased number of all blood cells (pancytopenia)
- low levels of lymphocytes (a type of white blood cells)
low level of phosphate in the blood
(hypophosphataemia)
- low level of calcium in the blood (hypocalcaemia)
- low level of albumin in the blood (hypoalbuminemia)
- high level of lipase enzyme in the blood
Uncommon: may affect up to 1 in 100 people
blurred vision
Tell your doctor or nurse straight away if you notice any of the side effects listed above.
Reporting of side effects
If you get any side effects, talk to your doctor, pharmacist or nurse. This includes any possible side effects not listed in this leaflet. You can also report side effects directly via the Yellow Card Scheme Website: www.mhra.gov.uk/yellowcard or search for MHRA Yellow Card in the Google Play or Apple App Store. By reporting side effects you can help provide more information on the safety of this medicine.
5. How to store Polivy
Polivy will be stored by the healthcare professionals at the hospital or clinic. The storage details are as follows:
- Keep this medicine out of the sight and reach of children.
- Do not use this medicine after the expiry date which is stated on the carton and the vial after EXP. The expiry date refers to the last day of that month.
- Store in a refrigerator (2 °C-8 °C).
- Do not freeze.
- Keep the container in the outer carton in order to protect from light.
Do not throw away any medicines via wastewater or household waste. Ask your pharmacist how to throw away medicines you no longer use. These measures will help protect the environment.
6. Contents of the pack and other information
What Polivy contains
- The active substance is polatuzumab vedotin.
Polivy 30 mg: Each vial contains 30 milligrams (mg)
polatuzumab vedotin.
Polivy 140 mg: Each vial contains 140 milligrams (mg)
polatuzumab vedotin.
- After reconstitution each millilitre (mL) contains 20 mg polatuzumab vedotin.
- The other ingredients are: succinic acid, sodium hydroxide, sucrose, polysorbate 20. See section “Polivy contains sodium”.
What Polivy looks like and contents of the pack
Polivy powder for concentrate for solution for infusion is a white to slightly greyish-white cake provided in a glass vial.
Each pack of Polivy consists of one vial.
Marketing Authorisation Holder and Manufacturer
Roche Products Limited
6 Falcon Way, Shire Park
Welwyn Garden City
AL7 1TW
United Kingdom
This leaflet was last revised in July 2026
----------------------------------------------------------------------------------
The following information is intended for healthcare professionals only:
Procedures for proper handling and disposal of anticancer medicinal products should be considered.
Instructions for reconstitution
- Polivy 30 mg: Using a sterile syringe, slowly inject 1.8 mL of sterile water for injection into the 30 mg Polivy vial to yield a single-dose solution containing 20 mg/mL polatuzumab vedotin. Direct the stream toward the wall of the vial and not directly on the lyophilized cake.
- Polivy 140 mg: Using a sterile syringe, slowly inject 7.2 mL of sterile water for injection into the 140 mg Polivy vial to yield a single-dose solution containing 20 mg/mL polatuzumab vedotin. Direct the stream toward the wall of the vial and not directly on the lyophilized cake.
- Swirl the vial gently until completely dissolved. Do not shake.
- Inspect the reconstituted solution for discolouration and particulate matter. The reconstituted solution should appear colourless to slightly brown, clear to slightly opalescent, and free of visible particulates. Do not use if the reconstituted solution is discoloured, is cloudy, or contains visible particulates.
Instructions for dilution
- 1.
Polivy must be diluted to a final concentration of
0.72-2.7 mg/mL in an intravenous infusion bag, with a minimum volume of 50 mL, containing 9 mg/mL sodium chloride solution for injection, or 4.5 mg/mL sodium chloride solution for injection, or 5% glucose.
- 2. Determine the volume of 20 mg/mL reconstituted solution needed based on the required dose (see below):
Total Polivy dose (mL)
to be further diluted =
Polivy dose (mg/kg) X patient’s weight (kg)
Reconstituted vial concentration (20 mg/mL)
- 3. Withdraw the required volume of reconstituted solution from the Polivy vial using a sterile syringe and dilute into the intravenous infusion bag. Discard any unused portion left in the vial.
- 4.
Gently mix the intravenous bag by slowly inverting the bag.
Do not shake.
- 5. Inspect the intravenous bag for particulates and discard if present.
Reconstituted solution
From a microbiological point of view, the reconstituted solution should be used immediately. If not used immediately, in-use storage times and conditions prior to use are the responsibility of the user and would normally not be longer than 24 hours refrigerated (2 °C-8 °C), unless reconstitution has taken place in controlled and validated aseptic conditions. Chemical and physical in-use stability of the reconstituted solution has been demonstrated for up to 72 hours refrigerated (2 °C-8 °C) and up to 24 hours at room temperature (9 °C-25 °C).
Diluted solution
From a microbiological point of view, the prepared solution for infusion should be used immediately. If not used immediately, in-use storage times and conditions prior to use are the responsibility of the user and would normally not be longer than 24 hours refrigerated (2 °C-8 °C), unless dilution has taken place in controlled and validated aseptic conditions. Chemical and physical stability of the prepared solution for infusion has been demonstrated for the durations listed in Table 1. Discard diluted Polivy solution if storage time exceeds the limits specified in Table 1.
Table 1 Durations for which chemical and physical stability of the prepared solution for infusion have been demonstrated
| Diluent used to prepare solution for infusion | Solution for infusion storage conditions1 |
| Sodium chloride 9 mg/mL (0.9%) | Up to 72 hours refrigerated (2 °C-8 °C) or up to 4 hours at room temperature (9 °C-25 °C) |
| Sodium chloride 4.5 mg/mL (0.45%) | Up to 72 hours refrigerated (2 °C-8 °C) or up to 8 hours at room temperature (9 °C-25 °C) |
| 5% glucose | Up to 72 hours refrigerated (2 °C-8 °C) or up to 8 hours at room temperature (9 °C-25 °C) |
1 To ensure product stability, do not exceed specified storage durations.
