Patient leaflet - FLIXONASE ALLERGY NASAL SPRAY, PIRINASE ALLERGY 0.05% NASAL SPRAY, PIRINASE HAYFEVER 0.05% NASAL SPRAY
Pirinase Hayfever 0.05% Nasal Spray
Fluticasone Propionate
Please read right through this leaflet before you start using this medicine.
This medicine is available without prescription, but you still need to use Pirinase Hayfever 0.05% Nasal Spray carefully to get the best results from it.
- Keep this leaflet you may need to read it again.
- If you have any questions, or if there is anything you do not understand, ask your
pharmacist.
In this leaflet:
-
1. What Pirinase Hayfever does
-
2. Check before you use Pirinase Hayfever
-
3. How to use Pirinase Hayfever
-
4. Possible side effects
-
5. How to store Pirinase Hayfever
-
6. Further information
-
1. What Pirinase Hayfever does
Pirinase Hayfever is used to treat and prevent the allergic symptoms of hayfever and other airborne allergies e.g. pet, house dust mite and mould spore allergies. It relieves symptoms including sneezing, itchy and watery eyes and a runny, itchy or blocked-up nose, for up to 24 hours.
The active ingredient is fluticasone propionate, a corticosteroid which, when used every day, has an anti-inflammatory action and works in a similar way to natural body chemicals to control inflammation. This spray helps control your body’s reactions to allergens (“triggers’) in the environment.
2. check before you use pirinase hayfever[xsymbol] do not use pirinase hayfever: if you have ever had an allergic reaction to fluticasone propionate or to any of the other
ingredients (listed in Section 6).
-
If you are under 18 years.
- Talk to your doctor or pharmacist before using Pirinase Hayfever if you have an infection in
your nose or sinuses, if you have a high temperature or you have recently had surgery , an injury or ulcers in your nose.
-
If your symptoms do not improve, or are not well controlled, after 7 days, talk to your
doctor or pharmacist.
M1–3–1-a4-text-pirinase-hayfever 170209st
- Do not use continuously for more than 3 months unless your doctor tells you to.
[!Symbol] If you are taking other medicines
Please tell your doctor or pharmacist if you are taking or have recently taken any other medicines including medicines obtained without a prescription; particularly corticosteroid medicines (including eczema creams, asthma inhalers, tablets, injections, nasal sprays, and eye or nose drops); ritonavir or cobicistat (anti-HIV medicines ) or ketoconazole (for fungal infections ).
Some medicines may increase the effects of Pirinase Allergy and your doctor may wish to monitor you carefully if you are taking these medicines (including some medicines for HIV: ritonavir, cobicistat).
[!Symbol] Pregnancy and breast feeding
Talk to your doctor before using Pirinase Hayfever if you are pregnant, trying to become pregnant or are breast feeding.
3. how to use pirinase hayfeveralways shake well before use. only use in the nose. do not swallow.pirinase hayfever quickly starts to reduce inflammation and swelling in your nose, although it may take 3 or 4 days to build up to its maximum protective effect. to prevent the onset of symptoms, start to use pirinase hayfever before exposure to one of your usual ‘triggers’. you should try to use the spray in the morning.
[tick Symbol alongside points below ]
Adults aged 18 years and over:
Spray two puffs into each nostril daily.
Once your symptoms have improved, you may be able to reduce the dose to one puff into each nostril once daily.
If your symptoms are especially bad, you may need to spray two puffs into each nostril twice daily until your symptoms improve.
[! Symbol alongside below bullet points]
- Do not spray more than 8 sprays (400 micrograms) in a day.
- Use the lowest dose possible to control your symptoms.
- If your symptoms do not improve, or are not well controlled, after 7 days, talk to
your doctor or pharmacist.
- Do not use more than the recommended dose.
If your use too many sprays
Tell your doctor.
If you forget to use the spray
Take your next dose at the usual time. Never take two doses together.
Before using a new bottle of Pirinase Hayfever:
- Your Pirinase Hayfever spray has a dust cap which protects the nozzle and keeps it clean.
Remember to take it off before you use the spray (Picture 1).
- Before you start to use a new bottle of Pirinase Hayfever, or if you have not used the spray
for a few days press the pump down several times until you get a fine spray.
- Hold the bottle as shown with your forefinger and middle finger on the collar either side of
the nozzle and your thumb underneath the bottle.
- Keeping your thumb still, press down with your fingers to pump the spray (Picture 2).
- When doing this make sure you do not point the nozzle at yourself or someone else.
- If the spray still doesn’t work, try to clean it as described under the ‘To clean the spray’
section. Do not try to unblock or enlarge the tiny spray hole with a pin or other sharp objects because this will destroy the spray mechanism.
[Picture 1] [Picture 2]
[tick Symbol] Using Pirinase Hayfever:
-
1. Shake the bottle well and remove the dust cap.
-
2. Blow your nose gently.
-
3. Close one nostril as shown and put the nozzle in the other nostril. Tilt your head forward slightly and keep the bottle upright. Hold the bottle as shown (Picture 3).
-
4. Start to breathe in slowly through your nose. While you are breathing in, squirt a spray of fine mist into your nostril by pressing down firmly on the collar with your fingers (Picture 4).
-
5. Breathe out through your mouth. Repeat step 4 to take a second spray in the same nostril.
-
6. Remove the nozzle from this nostril and breathe out through your mouth (Picture 5).
-
7. Repeat steps 3 to 6 for the other nostril.
-
8. After using the spray, wipe the nozzle carefully with a clean tissue or handkerchief and replace the dust cap.
[Picture 3] [Picture 4]
[Picture 5]
To clean the spray:
-
1. Take the dust cap and nozzle off (Picture 6).
-
2. Soak the nozzle and dust cap in warm water for a few minutes and then rinse under a running tap.
-
3. Shake off the excess water and allow to dry in a warm place – not too hot!
-
4. Re-fit the nozzle.
-
5. If necessary, press the pump down several times until you get a fine spray.
[Picture 6]
4. possible side effects
Like all medicines, Pirinase Hayfever can have side effects, but not everybody gets them.
Stop taking the medicine and seek immediate medical help if you experience:
- Allergic reactions. These may include developing a rash, swelling of the mouth or face or having difficulty breathing.
Stop taking the medicine and tell your doctor if you experience:
- Eye problems such as pain or blurred vision.
- Nasal problems such as pain and/or persistent bleeding.
The following effects may occur:
- Sneezing after using the spray but this soon stops.
- You may notice an unpleasant taste or smell.
- Nose bleeds.
- Dryness or irritation in the nose or throat.
- Headache.
It is important to follow the dose instructions shown in Section 3. Using Pirinase Hayfever at higher doses or for longer than 3 months at a time can cause a number of changes in your body such as catching infections more easily. If you get any side effects, talk to your doctor, pharmacist or nurse. This includes any possible side effects not listed in this leaflet. You can also report side effects directly via the Yellow Card Scheme at:. By reporting side effects you can help provide more information on the safety of this medicine.
5. how to store pirinase hayfever:keep out of the reach and sight of children.do not use this medicine after the ‘exp’ date shown on the pack.
Use within three months of first use.
Do not store above 30°C.
-
6. Further Information: